浚淵科技 JIUNYUAN
Pleated Cartridge FiltersPleated Cartridge Filters21Disposable & Capsule FiltersDisposable & Capsule Filters8Semiconductor Process FiltrationSemiconductor Process Filtration10Activated Carbon FiltersActivated Carbon Filters4Depth FiltersDepth Filters3Hollow Fiber Membrane FiltersHollow Fiber Membrane Filters1Filter Membranes & Syringe FiltersFilter Membranes & Syringe Filters2Filter BagsFilter Bags4Filter HousingsFilter Housings2Validation & Reclaim ServicesValidation & Reclaim Services6
Home/Products/Depth Filters
Depth Filters

Depth Filters

Depth Filters

PP melt-blown depth cartridges with high dirt-holding capacity and long service life, ideal for high-flow pre-filtration and UPW systems.

Depth filters use PP melt-blown or fiber-wound construction to build a graded-density structure — coarser fibers on the outer layer trap larger particles, finer fibers in the inner core capture sub-micron particles — distributing contaminants throughout the entire media thickness. This delivers 5–20× the dirt-holding capacity of surface (membrane) filters, making depth filters the preferred choice for high-flow pre-filtration.

JIUNYUAN depth filters are offered in two grades: Semi-Grade (semiconductor-grade) and General Industrial. The Semi-Grade line uses low-extractable PP resin, is produced in Class 100 environments, and is qualified by low-TOC and low metallic-ion release testing — meeting semiconductor UPW, CMP, PVA brush clean and POU requirements. The general industrial line covers retentions from 0.5μm to 100μm, delivering reliable high-flow pre-filtration at the lowest total cost of ownership.

Typical applications: semiconductor UPW pre-filtration, CMP slurry POU filtration, PVA brush clean fluids in display fabs, pharmaceutical purified water pre-filtration, chemical reactor feed clarification, electroplating bath pre-filtration, and RO membrane protection.

3 items
← Back
Facility PP Melt-blown UPW Filter

Facility PP Melt-blown UPW Filter

Facility UPW
Semi-grade PP CMP POU Filter

Semi-grade PP CMP POU Filter

CMP POU
Semi-grade PP Depth Filter

Semi-grade PP Depth Filter

Semi-grade PP

Frequently Asked Questions

How are depth filters paired with pleated cartridges?
Standard two-stage: upstream depth filter (5–10μm) captures large particles and provides high dirt-holding capacity; downstream pleated cartridge (0.2–1μm) provides precision filtration. Depth filters cost ~1/5 of pleated cartridges and dramatically extend pleated filter life — best total cost of ownership.
Difference between PP melt-blown and string-wound cartridges?
PP melt-blown has graded-density structure (coarse outer, dense inner), high dirt-holding capacity, and stable retention. String-wound has looser structure, lower cost, but greater retention drift and lower dirt holding. Semiconductor and pharma applications should use melt-blown; non-critical industrial pre-filtration can use string-wound.
Can depth filters be regenerated and reused?
PP melt-blown and string-wound cartridges are single-use. Backwashing does not fully restore capacity and may release captured contaminants. Replace at set ΔP or runtime. For reusable construction, switch to sintered metal or ceramic elements.

Technical Articles in This Category

Understand the principles and how to read the specs before you choose.

2026-04-03

Liquid Filter Rating Selection: Matching Process Needs

A complete rating map from 100 µm to 1 nm, plus a 5-step reverse-engineering method and 10 typical scenarios — do not over-spec, do not under-spec.

2026-03-13

Estimating Liquid Filter Lifespan: Drivers and Replacement Triggers

"How often do I replace?" is the wrong question — lifespan depends on 7 variables. This article covers dirt-holding capacity, pressure curves, integrity testing, CIP/SIP effects, and TCO math.

2026-05-04

Multi-Stage Filtration Design Logic for Semiconductor UPW Systems

Semiconductor ultrapure water (UPW) quality targets far exceed pharmaceutical-grade water: ASTM D5127 Type E-1 mandates resistivit…

Customization

Need a Custom Solution?

Custom sizes, materials or validation protocols — we can build the solution around your process.

Request Customization